Bronco side mirror replacements
- Thread starter pb40nc
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Seabronc
New member
I can't see any reason why not. It just depends on how skilled you are at making modifications to your door. You probably will have to put some sort to reinforcement where you mount the new mirrors and do some minor body work to plug a couple of old holes. Another approach is to go to a junk yard and check out as door with paddle mirrors and take the hardware from there or the entire door. All Bronco and F series doors are interchangeable from 80 to 96 by changing the inside door panels.
Good luck,
>-
Good luck,
>-
DesertRatt1322
New member
I just replaced my doors from a 89 which has the orginal style mirrors on it, I am going to put mirrors from a 92-96 which i already have. Just need to cut the hole in the door skin so that it can mount to the inside of the door. Then just do so minor welding and grinding on the 2 lower holes, primer and paint. Not to hard to do.
yo PB,
Welcome!
As Seabronc and DesertRatt advised;
here is something similar to your plan; http://www.supermotors.net/registry/2742/12641
by Steve
Welcome!
As Seabronc and DesertRatt advised;
here is something similar to your plan; http://www.supermotors.net/registry/2742/12641
by Steve
