Sign In
Register
Help
Where does the license plate wiring exit the tailgate on my 76 bronco? Is there a hole somewhere?
Page 1 of 1
- You cannot start a new topic
Add Reply
license plate wiring Where does it exit the tailgate?
MultiQuote
#2
- Supreme Commander
-
- Group: Members
- Posts: 1,609
- Joined: 23-May 04
- Gender:Male
- Location:Boulder City, Nevada (Las Vegas area)
- Interests:Hot women, 4x4'n, flying homebuilts -- or -- a nice Super Cub !
Posted 13 March 2009 - 07:59 PM
Yep..., right out the bottom of the closed tailgate... approx. 3-4 in. left of the frame. (at least on my '66)
1966 "U-13" Roadster...topless, doorless.
200 cu.in. I-6 with 250 head.
Pwr. steering, Hurst 3-speed floor shifter.
Split headers, dual exhaust, Holley 1 brl.
Stock axles...456's...32's ...Posi rear. 2.5 in. lift.
Full roll-cage, front.
65 gallons of fuel on board..!
70+ MPH cruise---15 MPG
---Jeep recovery unit---
6 EB's (& 11 early Land Cruisers) restored & sold..
200 cu.in. I-6 with 250 head.
Pwr. steering, Hurst 3-speed floor shifter.
Split headers, dual exhaust, Holley 1 brl.
Stock axles...456's...32's ...Posi rear. 2.5 in. lift.
Full roll-cage, front.
65 gallons of fuel on board..!
70+ MPH cruise---15 MPG
---Jeep recovery unit---
6 EB's (& 11 early Land Cruisers) restored & sold..
#3
- Bronco Commander
-
- Group: Members
- Posts: 557
- Joined: 21-January 09
- Gender:Male
- Location:Amherst, Va
Posted 13 March 2009 - 08:04 PM
the wiring exits beside the light, down through the bracket and enters the tailgate again on the angled top side bottom of gate and then directly through bottom. (should be a hole on bottom round side of tailgate)
76 Early Bronco, Special Decor Package, 302, C4, Dana 20, Dana 44, 9", Hatteras green poly, 5.5" superlift, 36" swampers
78 F-100 Custom 2WD 302, C4, Dana 44, black, a/c
79 F-150 Ranger 4WD 400, C6, NP 205, Dana 44, 9", Walnut Glow/ Light sand, a/c cc
97 Chevy S-10 4WD 4.3, Standard red, a/c cc
78 F-100 Custom 2WD 302, C4, Dana 44, black, a/c
79 F-150 Ranger 4WD 400, C6, NP 205, Dana 44, 9", Walnut Glow/ Light sand, a/c cc
97 Chevy S-10 4WD 4.3, Standard red, a/c cc
#4
- Where's My Hammer!?!
-
- Group: Members
- Posts: 7
- Joined: 14-January 09
- Gender:Male
- Location:Estacada, Oregon
Posted 13 March 2009 - 09:57 PM
Bronc76, on Mar 13 2009, 08:04 PM, said:
the wiring exits beside the light, down through the bracket and enters the tailgate again on the angled top side bottom of gate and then directly through bottom. (should be a hole on bottom round side of tailgate)
Since there is no hole at the bottom of the tail gate, my guess is that a previous owner filled the hole. The location you suggest makes sense since I located a cut wire (hot too with lights on) centered under the license plate underneath and in front of the bumper. Thanks
Get er done Son
My 76 U-15 Bronc is an uncut 302 with a C-4 and 4:11
gears. CAGE 5.5" lift. Starts first kick every kick.
My 76 U-15 Bronc is an uncut 302 with a C-4 and 4:11
gears. CAGE 5.5" lift. Starts first kick every kick.
Page 1 of 1
- You cannot start a new topic
- Add Reply