Hey guys, new to this forum. im looking to redo a 79. what mags or catologs would you guys recomend. jeep has an endless amount of material for their trucks, just wondering what you guy have done in the past for ordering parts for your rebuilds.. thanks guys.. stecz
Page 1 of 1
Bronco mags or catologs
#2
Posted 22 February 2009 - 05:05 AM
Welcome to the Zone
<' /> . There area lot of companies that deal with Ford parts. Try http://www.lmctruck.com , http://www.broncograceyard.com , http://www.jegs.com , http://www.summitracing.com for a few.
Good luck,
Good luck,
Fred
Parts replacement is not trouble shooting, replacement follows trouble shooting
Broncos are MPVs not SUVs
Communication: I know you think you know what I said, but what you need to know is, I didn't say what I meant.
Some of my pictures at Supermotors http://www.supermotors.net/212
1983 Full Size Bronco with; Ford 8.8" 3.08:1 Rear; Dana 44 3.08:1 Front; WARN Premium locking hubs; 31x10.5's; NP208; Holley 4160 4bbl; MSD 6AL Ignition; MSD Blaster 2 coil;
1978 Saginaw Pump V-Belt Power Steering;
1984 F150 Dash;
1985 351W HO;
1985 Tilt steering wheel;
1993 Mercury Sable 3G 130 Amp Alternator;
1995 F150 doors;
1995 20 inches of rear portion of the tub;
1996 Bronco tail gate;
1996 Eddie Bower Over Head Console;
1996 Lincoln Mark VIII 4200 CFM Electric Fan;
Headlight harness upgrade; DRLs; Battery relocated to rear; Under hood fuse box vs fusible links; Upgraded wiring for rear window to 10 AWG;
Always under restoration
Parts replacement is not trouble shooting, replacement follows trouble shooting
Broncos are MPVs not SUVs
Communication: I know you think you know what I said, but what you need to know is, I didn't say what I meant.
Some of my pictures at Supermotors http://www.supermotors.net/212
1983 Full Size Bronco with; Ford 8.8" 3.08:1 Rear; Dana 44 3.08:1 Front; WARN Premium locking hubs; 31x10.5's; NP208; Holley 4160 4bbl; MSD 6AL Ignition; MSD Blaster 2 coil;
1978 Saginaw Pump V-Belt Power Steering;
1984 F150 Dash;
1985 351W HO;
1985 Tilt steering wheel;
1993 Mercury Sable 3G 130 Amp Alternator;
1995 F150 doors;
1995 20 inches of rear portion of the tub;
1996 Bronco tail gate;
1996 Eddie Bower Over Head Console;
1996 Lincoln Mark VIII 4200 CFM Electric Fan;
Headlight harness upgrade; DRLs; Battery relocated to rear; Under hood fuse box vs fusible links; Upgraded wiring for rear window to 10 AWG;
Always under restoration
#3
Posted 23 February 2009 - 08:25 AM
You can also try nationalpartsdepot.com and paddockparts.com
76 Early Bronco, Special Decor Package, 302, C4, Dana 20, Dana 44, 9", Hatteras green poly, 5.5" superlift, 36" swampers
78 F-100 Custom 2WD 302, C4, Dana 44, black, a/c
79 F-150 Ranger 4WD 400, C6, NP 205, Dana 44, 9", Walnut Glow/ Light sand, a/c cc
97 Chevy S-10 4WD 4.3, Standard red, a/c cc
78 F-100 Custom 2WD 302, C4, Dana 44, black, a/c
79 F-150 Ranger 4WD 400, C6, NP 205, Dana 44, 9", Walnut Glow/ Light sand, a/c cc
97 Chevy S-10 4WD 4.3, Standard red, a/c cc
#4
Posted 26 February 2009 - 06:33 PM
A good bi-monthly magazine to be subscribed to is Bronco Driver Magazine.
Only The Best Trucks Are Backed Up By The Blue Oval.
79 Bronco, 400, NP205
33x12.50 Mastercraft Courser MT
KC Daylighter Off Road Lights
4barrel Edelbrock Intake, 600cfm manual choke Holley
clear front parking light lenses
79 Pickup, 302, two-wheel drive
Bored .30, Comp 268 Cam
4barrel Edelbrock Intake, 600cfm manual choke Edelbrock
73 F100, 302, two-wheel drive, short wheelbase
All Original 57,111 miles
79 Bronco, 400, NP205
33x12.50 Mastercraft Courser MT
KC Daylighter Off Road Lights
4barrel Edelbrock Intake, 600cfm manual choke Holley
clear front parking light lenses
79 Pickup, 302, two-wheel drive
Bored .30, Comp 268 Cam
4barrel Edelbrock Intake, 600cfm manual choke Edelbrock
73 F100, 302, two-wheel drive, short wheelbase
All Original 57,111 miles
Page 1 of 1

Sign In
Register
Help

Add Reply
MultiQuote



